<p id="nlppn"></p>

      <pre id="nlppn"><del id="nlppn"><mark id="nlppn"></mark></del></pre>

        <pre id="nlppn"></pre>
        <ruby id="nlppn"></ruby><pre id="nlppn"></pre>

          <pre id="nlppn"></pre>
          
          
            <p id="nlppn"><del id="nlppn"><mark id="nlppn"></mark></del></p>
              關于IP等級
              您當前的位置 : 首 頁 > 技術支持 > 關于IP等級

              防護等級

              防水、防塵規格在IEC60529(國際電氣標準會議)中,是為了標識對電機機械器具的保護等級(IP等級)所制定的。IP后面的兩個數字,左側的表示防塵等級,右側的表示防水等級。例如(IP45)表示的是:防塵等級為4級、防水等級為5級。另外,如僅用IP標準表示防水等級的時候則寫成(IPX5)的形式。(X)表示沒有做防塵測試,(IPX5)僅僅表示防水等級為5級。
              Waterproof & Dust specifications IEC60529 (International Electrotechnical Commission)) in order to identify the motor mechanical appliances of
              protection (IP rating) enacted. IP latter two figures, the left indicates dust levels, water level indicates the right. For example (IP45) indicate that:
              waterproof dustproof grade 4 grade 5. In addition, if only the IP standard indicates when the water level is written (IPx5) form. (X) indicates that no
              dust tests done, (IPx5) merely expressed waterproof rating of 5.

              IP等級詳解
              IP RATING COMMENTS

              1637135094(1).jpg


                                                                防塵/Dust-proof

                      防水/Waterproof
              級別/Level防塵入侵等級
              Dust Intrusion Level
              級別/Level防水浸入等級
              Waterproof immersion class
              0無保護
              Unprotected
              0 無保護
              Unprotected
              1可防止直徑在50mm以上的外來固體的侵入。
              可防止成人的拳手接觸到危險部位。
              More than 50mm in diameter to prevent the solid foreign invasion.
              Prevents adult boxers exposed to dangerous sites.
              1 可避免從產品上方垂直滴下的水的侵入。
              To avoid dropping from the top of the product vertical
              water intrusion.
              2可防止直徑在12.5mm以上的外來固體的侵入。
              可防止成人的手指接觸到危險部位。
              12.5mm in diameter, to prevent the solid foreign invasion above.
              Prevents adult fingers exposed to dangerous sites.
              2 產品傾斜15度的狀態下可避免從產品上方垂直滴下
              的水的侵入。
              Product tilted 15 degrees from the product state can avoid
              hanging above Direct intrusion of water drops.
              3可防止直徑在2.5mm以上的外來固體的侵入。
              可防止工具接觸到危險部位。
              More than 2.5mm in diameter prevents the intrusion of foreign solids.
              Prevents access to dangerous parts of the tool.
              3 產品傾斜60度的狀態下可避免從產品上方噴霧狀水的侵入。
              Product tilted 60 degrees from the product state can
              avoid over spray water intrusion.
              4 可防止直徑在1.0mm以上的外來固體的侵入。
              可防止別針接觸到危險部位。
              More than 1.0mm in diameter prevents the intrusion of foreign solids.
              Prevents access to dangerous parts of the clip.
              4 產品能防止任何方向飛濺而來的水沫的浸入。
              Products to prevent splashing from any direction of spray
              immersion.
              5 即使防塵實驗用的粉塵(直徑75μm)進入,原本的動作和
              安全性能也無損害。
              Even dust experiment with the dust (diameter 75μm) into the original
              The actions and safety performance without damage.
              5 產品能防止任何方向噴流而來的水的浸入。
              Product can be prevented from any direction of the water
              jet immersion.
              6 耐塵實驗用的粉塵(直徑75μm)無法侵入。
              Dust experiment with the dust (diameter 75μm) can not be penetrated.
              6 產品能防止任何方向猛烈噴流而來的水的浸入。
              Products can prevent violent jets from any direction of the
              water immersion.


              7 浸入水中沒有影響,可在水中使用。
              Immersed in water has no effect, can be used in the water.


              8 8 可在潛水狀態下使用,比7級更嚴酷的條件中仍能使用。
              Can be used in submerged condition, more than seven
              severe conditions can still be used.


              9K 防止高溫高壓近射水侵入
              High pressure water jet to prevent intrusion near

              關于我們的防水型號產品,我們可以隨時為您做驗試(無負荷狀態下進行鎖擋板的防水測試),如有需求請聯系我們。
              不過,IP標準是在實驗室里進行的防水測試。在現實環境中用在實際裝備上時,還請進一步確認。
              About Us waterproof models, we can always do for you test trial (under no-load condition lock bezel waterproof test), if demand, please contact us.
              However, IP standards are carried out in the laboratory water testing. In reality when used in the actual equipment, also requested further confirmation.

              Copyright ?寧波恒杰工業鎖閉技術有限公司 All rights reserved |浙ICP備2021013889號 | 技術支持: 華企立方
              熱推信息 | 企業分站 | 網站地圖 | RSS | XML
              主營區域: 江蘇 上海 浙江 昆山 蘇州 廣東 廣州
            1. 網站首頁
            2. 咨詢電話
            3. 返回頂部
            4. 音影先锋中文字幕,日本免费一区二区三区a区,日本精品一区二区,国产一级在线
                  <p id="nlppn"></p>

                  <pre id="nlppn"><del id="nlppn"><mark id="nlppn"></mark></del></pre>

                    <pre id="nlppn"></pre>
                    <ruby id="nlppn"></ruby><pre id="nlppn"></pre>

                      <pre id="nlppn"></pre>
                      
                      
                        <p id="nlppn"><del id="nlppn"><mark id="nlppn"></mark></del></p>